Arc Flash Harness Webbing

In addition to our arc flash lanyard webbing, arc flash harness webbing is woven from 100% Kevlar® or custom blends using Nomex® and Kevlar®. The webbings are 3rd party tested for performance per ASTM F887; certificates and test videos are available upon request.

Looking for a specific look and feel? Custom arc flash harness webbing can be woven to meet specific performance, design, and branding needs, and can be woven in various widths to fit custom-designed fall protection hardware.

When considering an arc flash harness webbing supplier, performance is critical. In addition to third-party arc flash testing, each webbing is tested in-house for tensile (7,000-lb minimum) and post-abrasion tensile (3,500-lbs minimum), per ANSI/ASSP Z359.11. A certificate of compliance is provided with every shipment at no charge.

With short lead times and low minimums, please contact us to see how Sturges can assist.

Products

Sturges Part No. 37506
Description: 1-3/4″ Black Kevlar® Webbing with Natural Stripes; MBS 7000 lbs; UL Model # X-6200. Product compliant with Berry Amendment.

Sturges Part No. 37513
Description: 1-3/4″ Black Kevlar® Webbing; MBS 10,500 lbs; UL Model #X-5859; Product compliant with Berry Amendment.

Sturges Part No. 37515
Description: 1-3/4″ Black Nomex® Over Kevlar® Webbing; MBS 7000lbs; Product compliant with Berry Amendment; Custom colors available.

Sturges Part No. X-6813
Description: 1-3/4″ Black Nomex® Over Kevlar® Webbing with Reflective Stripe; MBS 7000lbs; Product compliant with Berry Amendment.

Sturges Part No. X-6869
Description: 1-3/4″ Reflective Black Kevlar® Webbing with Orange Nomex® back; MBS 7,000 lbs; Product compliant with Berry Amendment.